# Matrix

Matrix and Matrix2

- Why is the Digital Output level extremely low and not changing?
- What does the LCD display directly above the Matrix's Master Fader do?
- Does the Matrix's assignable insert points and effect chains system introduce latency?
- How are the Matrix's A/D and D/A converters clocked?
- When running Logic there is no 'Frame' data shown on the Matrix timecode display. The left display bank is blank, then the hh:mm:ss data is displayed.
- Configuring Logic's Control Surface Setup for Matrix DAW control?
- How do I update Matrix's software?
- What is Matrix's SuperAnalogue™ router?
- What are Matrix's physical audio and control connections?
- Can Matrix be integrated with X Rack's Total Recall?
- Via Matrix's SuperAnalogue™ router, can you build chains of outboard equipment?
- What is Matrix's SuperCue function?
- What is the “Focus Fader” on Matrix?
- Does Matrix have talkback facilities?
- Matrix and Logic 10.2
- Matrix SuperCue and Logic Auto-Punch
- What is the panning law on Matrix?
- Can the Matrix console be used for surround mixing?
- Is the Surround Monitor Card an option or a standard feature on Matrix/Matrix 2?
- What are the differences between Matrix 2 and the original Matrix console?
- Does the ground pin on the rear of the Matrix, near the mains connector socket, need to be connected?
- Can I connect two pairs of "mini" monitors to the Matrix, using the XLR connectors for one and the DB25 for the other?
- Which ipMIDI ports should I select in my DAW to use Matrix as a controller?
- On Matrix, what is the best way to use solo in 32 channel mixdown mode?
- Where is unity gain on the Matrix Monitor pot?
- What is the +18dB/+24dB switch on the back of the Matrix used for?
- Where is unity gain on the Matrix channel send pots?
- How does the Matrix Surround Monitor card work?
- Should I use a UPS power conditioning system with my Matrix console?
- Why have some of my Matrix soft keys stopped working when using an MCU layer?