The Fusion voltage input is region-specific. The SSL dealer should have configured the two fuses for your local region.
If you need to change the two fuses please see appendix E of the Fusion User Guide for fuse type information. SSL do not have specific recommendations for fuse brands, they are a commodity.
Please be aware that only fuses for the initial territory the Fusion was sold into are included.
Different fuses are required for 115V or 230V. Do not simply use the same fuse.
Early Fusion had a link plate on one side of the fuse cartridge; both existing fuse and link plate should be replaced with two new fuses of the correct rating:
- 5mm x 20mm
- Time delay (slow blow)
- 110-120Vac requires two 1A
- 220-240Vac requires two 500mA