FAQ published on: 07/06/2012
Last edited: 07/06/2012
The SUM REC on the XR622 Master Module sums the REC Bus signal with the MIX Bus signal post insert. It cannot be switched to pre insert. This means that when summing the REC Bus signal with the MIX Bus signal, only the MIX Bus signal will be affected by any insert processing.
If you want the REC Bus signal to be processed, you can connect the Rec Bus output to an input on one of your four channel or eight channel input modules. Watch out for feedback if you do this with the four channel input module (that input should never be routed to the REC Bus!)