How do I cascade an X-Rack into an X-Desk?
FAQ published on: 25/03/2009
Last edited: 23/06/2011
Connecting the "Mix Bus Link" output from an X-Rack to the "X-Rack Expansion" socket on the rear of the X-desk cascades the Mix Bus and Solo from an X-Rack summing system into the X-Desk. You MUST NOT have an XR622 Bus Master Module fitted into the X-Rack, as the X-Desk acts as the master summing Bus.
The X-Rack Expansion connector on the X-Desk and the Mix Bus Link connector on the X-Rack must be connected using a pin to pin cable. This is not the same as the Tascam standard.
The pinout tables for these connectors are provided:
- In the X-Desk Install Guide, on page 43 (after all the different language translations):
- In the X-Rack manual,on page 16: