What cable should I use to connect the X-Rack Expansion connector (X-Desk) and the Mix Bus Link connector (X-Rack)?
FAQ published on: 23/06/2011
Last edited: 23/06/2011
The X-Rack Expansion connector on the X-Desk and the Mix Bus Link connector on the X-Rack must be connected using a pin to pin cable. Note that this is not the same as the Tascam standard.
The pinout tables for these connectors are provided:
- In the X-Desk Install Guide, on page 43 (after all the different language translations):
http://www.solidstatelogic.com/docs/XLogic_X-Desk_Install_Guide.pdf
- In the X-Rack manual,on page 16:
http://www.solidstatelogic.com/docs/XLogic_X-Desk_Install_Guide.pdf